Bystronic Laser Error Code List -

Many drive-related error codes disappear once the automatic lubrication system is refilled and the rails are wiped clean. When to Call Technical Support

Often caused by empty tanks or incorrect mixing ratios in CO2 lasers.

Bystronic systems, including the ByStar, BySmart, and older Bysprint models, categorize errors based on the subsystem affected. Generally, these codes appear on the MMC (Man-Machine Communication) interface. 1. Resonator and Laser Source Errors bystronic laser error code list

Modern Bystronic lasers use sophisticated capacitive sensing to maintain the focal point:

The machine stops because the nozzle touched the workpiece. This can be caused by "tipped" parts or incorrect "slug" management. Many drive-related error codes disappear once the automatic

Triggered when the cutting head moves beyond its physical or software-defined boundaries.

Ensure all safety gates are closed and reset the physical E-Stop buttons. Pro-Tips for Rapid Troubleshooting Generally, these codes appear on the MMC (Man-Machine

Indicates a communication lag or hardware failure in the X, Y, or Z-axis motors.

Over 50% of cutting errors are solved by simply replacing a worn nozzle or a scorched lens.

If the chiller temperature deviates by even a few degrees, the resonator will shut down to prevent thermal damage.