Chipblaster Jv10 Manual | PRO |

Draws filtered coolant from the reservoir and delivers it directly to the machine spindle or turret at high pressure.

Check the filters first. Clogged elements restrict flow. Alternatively, the regulator may need manual readjustment, or the internal positive displacement pump seals may be worn.

The your controller outputs (24V, 110V, etc.) The specific parts or wiring diagrams you are looking for chipblaster jv10 manual

Pleated filter cartridges trap particulate matter down to 10 microns. A crossover valve setup allows operators to swap clogged filters while the unit remains fully operational.

Trigger the high-pressure coolant via M-code on the CNC controller. Loosen the locknut on the pressure regulator. Draws filtered coolant from the reservoir and delivers

Allows users to manually change or dead-head the pump to dial in exact pressure output without exceeding maximum limitations. Installation & System Set-Up

+--------------------------+-----------------------+------------------------------------------+ | Maintenance Task | Frequency | Purpose | +--------------------------+-----------------------+------------------------------------------+ | Check Filter Gauges | Daily | Monitor for pressure differential drops | | Purge Air via Petcocks | After filter change | Prevent pump cavitation & dry-running | | Clean Sump and Tank | Bi-Annually | Eliminate sludge and debris buildup | | Check Line Hose Wear | Monthly | Prevent dangerous line ruptures | +--------------------------+-----------------------+------------------------------------------+ Troubleshooting Faults Trigger the high-pressure coolant via M-code on the

According to official specifications from Revelation Machinery and industrial equipment guides, the ChipBLASTER JV10 features the following mechanical and electrical footprint: 1500 PSIG (103.4 BAR) Coolant Volume: 10 Gallons Per Minute (37.8 LPM) Integral Tank Capacity: 48 Gallons Power Requirement: 460V / 3-Phase / 60 Hz Motor Rating: 7.5 HP Footprint Dimensions: 35″ Depth x 55″ Width Key System Components