Factory Reset Verified — Evoko Liso

: Use a tool like balenaEtcher or Win32 Disk Imager .

To perform a on an Evoko Liso room manager , you must use a bootable USB flash drive containing the official firmware reset image . Unlike many consumer devices, the Evoko Liso does not have a simple "factory reset" button; the pinhole on the bottom of the unit is for rebooting only and will not wipe data or configuration settings. 1. Prepare the Reset USB Drive

You cannot simply copy files to a thumb drive; it must be "imaged" to become bootable. evoko liso factory reset verified

Insert a USB drive (at least 4GB; note that Kingston drives are often incompatible with Liso). Select the downloaded .gz image and flash it to the drive.

: Obtain the latest Liso Device Reset (GZ file) from the Biamp/Evoko Support Portal . Ensure you select the version (e.g., v. 2.x) that matches your Evoko Home installation. : Use a tool like balenaEtcher or Win32 Disk Imager

: Plug the prepared reset drive into the USB port on the back/bottom of the unit.

If you still have access to the device and only need to change settings without a full wipe, use the : Tap the Menu/Information icon on the screen. Select the downloaded

This process will erase all configuration, unpair the device from Evoko Home , and revert the firmware to the version on the USB.