Firstchip FC1178 and FC1179 MPTools V1.0.5.2 is a powerful "last resort" for fixing broken USB drives. By reflashing the controller's instruction set, you can often breathe new life into hardware that seems destined for the trash.
This means the NAND memory chip on your drive is newer than the database in version V1.0.5.2. You may need to look for a newer version of the Firstchip software.
If the process fails halfway, the flash memory chip might be physically damaged. Conclusion --- Firstchip Fc1178 Fc1179 Mptools V1.0.5.2 -
Click "Settings" (the password is usually blank or "123456"). Here you can change the Vendor ID (VID), Product ID (PID), or disk labels.
Create CD-ROM partitions or security areas on the thumb drive. Key Supported Controllers Firstchip FC1178 and FC1179 MPTools V1
Plug in your USB. It should appear in one of the numbered slots in the interface.
Before downloading, verify your controller using a tool like or Flash Drive Information Extractor . Look for "Controller: Firstchip FC1178" or "FC1179." If the controller matches, proceed. 2. Preparation You may need to look for a newer
It is best to run this tool on Windows 7 or 10 in Administrator mode. Some users find better stability using a USB 2.0 port rather than a USB 3.0 port. 3. The Recovery Process Open the Tool: Run FirstChip_MpTool.exe .
Bypass "Windows was unable to complete the format" errors.
Resolve issues where the computer recognizes the device but cannot access the storage.