Touch the cards/tags you wish to register to the external reader one by one.
The Gateman 1544 allows you to toggle between "Auto" and "Manual" modes via a switch located under the battery cover. The door locks 2–5 seconds after closing.
Use a microfiber cloth. Avoid harsh chemicals that can degrade the protective coating on the numbers. gateman 1544 manual verified
Note: Always perform this with the door open to avoid accidental lockouts! 2. Registering Key Tags (RFID)
Before doing anything else, you must set your own security code. For the Gateman 1544, the registration button (marked as ) is located inside the battery compartment. Steps to Register/Change Pin: Open the battery cover on the interior unit. Press the [I] button briefly (you will hear a beep). Touch the cards/tags you wish to register to
This is usually the low-battery warning. Replace all 4 AA batteries with high-quality Alkaline brands (avoid mixing old and new).
When you are inside and don't want anyone (even those with a valid PIN) to enter, slide the internal forced lock switch to . This disables the external keypad. 4. Emergency Power: The 9V Battery Hack Use a microfiber cloth
Check for battery leakage or ensure the 9V emergency trick works. If it doesn't, the ribbon cable connecting the front and back units may be loose.
Most digital locks are designed for the 1.5V output of Alkaline batteries; rechargeables (1.2V) can cause erratic behavior.
You must touch the keypad with your palm or press the "Close" button internally to lock the door. The "Palm Touch" Feature