Identifies the hardware configuration (suction vs. pressure).
The display will show a 0 , indicating the unit is ready for a Function Code (FC) or Command Code (CC). 3. Essential Command Codes (CC) Gilbarco Sk700 Programming Manual
Programming is performed using the located inside the dispenser’s head unit. Press the F1 key to initiate the command entry. Identifies the hardware configuration (suction vs
Sets maximum flow rates for different fuel grades (e.g., 40L/min vs 80L/min). Country Code Gilbarco Sk700 Programming Manual
Configures default regional settings (e.g., Australia = 36). 4. Basic Post-Cold Start Setup