Harvey Hv3 Water Softener Installation Manual -

Because the HV3 is non-electric, it uses water pressure to regenerate. This requires two drainage lines. The Drain Line (High Pressure) Connect the 1/2" drain hose to the softener's drain outlet.

Connect the incoming hard water to the "In" port on the back of the softener. harvey hv3 water softener installation manual

Before you begin, ensure you have the correct tools and have checked your plumbing compatibility. Tools Needed: Pipe cutter or hacksaw Adjustable spanners Drill (if wall-mounting or creating a waste exit) Site Requirements: Because the HV3 is non-electric, it uses water

Open a cold-water tap for a few minutes to clear any air pockets and fine resin particles. Because the HV3 is non-electric

If you notice a drop in pressure, check that the bypass valves are fully open.