Icom Icf121 Manual Upd -

Used to select the operating channel or change settings in "Set Mode". Display Indicators: TX: Appears during transmission. BUSY: Indicates the channel is active.

Select the desired channel using the UP/DOWN keys and adjust the volume. If a channel is busy, the "BUSY" indicator will light up.

"Set Mode" allows you to customize seldom-changed settings like display backlighting. Turn the radio . icom icf121 manual

Push and hold the PTT (Push-To-Talk) switch on the microphone. Speak into the mic at a distance of about 5–10 cm (2–4 inches). 2. Entering User Set Mode

While pushing and holding both and DOWN keys, push [POWER] to enter Set Mode. Used to select the operating channel or change

Use the keys to select the setting and then push [P0] to toggle or adjust the level. Push [POWER] again to save and exit. 3. Scanning

50W (VHF), providing reliable long-distance communication. Select the desired channel using the UP/DOWN keys

4W front-mounted speaker for clear reception even in noisy environments.