Connect the pump to the dedicated socket at the rear. It is highly recommended to use an original Ivoclar Vivadent vacuum pump to ensure compatibility with the furnace’s power consumption limits.
To ensure safe and optimal operation, follow these installation guidelines:
Turn on the power switch at the rear. The furnace performs a self-test before displaying the standby screen. Program Selection: Enter the desired Program Number ( ) using the keypad. Press START ( ivoclar programat p100 manual english
Verify that your local voltage matches the rating plate before connecting the supplied power cord.
The is a classic, fully automatic microprocessor-controlled vacuum ceramic furnace designed for high-precision dental laboratory applications . Known for its reliability and straightforward numeric keypad entry, the P100 remains a staple in many labs for firing dental ceramics. 1. Setup and Installation Connect the pump to the dedicated socket at the rear
You can customize parameters such as holding temperature ( ), temperature increase rate ( ), and holding time ( ) via the menu buttons. 3. Temperature Calibration (Silver Test)
or 62) to begin the firing cycle once the furnace reaches the standby temperature ( The furnace performs a self-test before displaying the
Periodic calibration is essential as physical impacts and residue can cause slight shifts in temperature accuracy. Programat®
The P100 uses a numeric keypad for selecting and editing programs.
Secure the heater plug by rotating it 45° until it snaps into place, and ensure the thermocouple plug is inserted with correct polarity. 2. Operating Procedures