Knox Keysecure 3b Installation Manual Hot -

: The unit requires a 12 to 15 volt DC power supply at 3 amps .

: Choose a sturdy, flat surface within the vehicle.

: The unit includes a relay circuit that can be wired to an optional strobe light or alarm system to indicate when a key is out of the unit. 4. Software Setup and Programming knox keysecure 3b installation manual hot

: Use the 4-position quick-connect terminal block for simplified wiring.

Proper wiring is critical for the unit's keypad and audit trail features to function. : The unit requires a 12 to 15

: Insert the Tech Key into the tech lock and turn it counter-clockwise to loosen and remove the lock, allowing the faceplate to be removed. 2. Hardware Installation & Mounting

: Secure the housing using at least four Grade 5 or Grade 8 fasteners (e.g., 3/8" diameter carriage bolts). 3. Electrical Installation : Insert the Tech Key into the tech

The KeySecure 3b can be mounted in a vehicle or surface-mounted to an interior wall.

The is a rugged, high-security master key retention system designed primarily for fire apparatus and emergency response vehicles. It ensures that master keys are only accessible to authorized personnel using a specific PIN code. 1. Preparation and Hardware Disassembly

Once the hardware is powered, you must configure the system using the . Knox Box Installation Guideline - South King Fire, WA