Kt 70 Installation Manual 〈Official〉

: An optional remote "Ident" switch can be wired to the yoke for pilot convenience. 🛰️ Mode S Programming

The KT 70 is designed for standard panel mounting within the Silver Crown Plus product line. Specification 11.0 to 33.0 VDC (Compatible with 14V and 28V systems) Current Draw 35 Watts maximum Output Power 200 Watts peak pulse minimum Weight 3.90 lbs (1.77 kg) Dimensions 1.63" H x 6.25" W x 10.0" L Certification TSO C112 (Mode S) 🏗️ Mounting and Wiring Kt 70 Installation Manual

: The manual describes how to set the specific aircraft address using a dedicated programming module or hard-wiring specific pins. : An optional remote "Ident" switch can be

: Heavy-gauge wire is recommended to handle peak pulse loads. : Heavy-gauge wire is recommended to handle peak pulse loads

: The unit should be located in the radio stack where it is easily accessible to the pilot.

Unlike older Mode A/C transponders, the KT 70 requires a unique 24-bit ICAO aircraft address.

: Technicians must ensure the address matches the aircraft's official registration database. 🔍 Post-Installation Checkout