Lambert Lx 24 Fi Manual English Official

Ignition Failure. This usually means the gas supply is interrupted or the ignition electrode is dirty. Check that your gas meter is on and hit "Reset."

Low Water Pressure. The system pressure has dropped too low. Refill using the filling loop as described above.

If the boiler stops working, the display will usually flash an alphanumeric code. Here are the most common codes found in the Lambert Lx manual: Lambert Lx 24 Fi Manual English

Flue Gas Pressure Switch. This indicates an issue with the fan or a blockage in the chimney flue.

Shows current water temperature, system pressure (in bar), and error codes. Ignition Failure

Full electronic ignition with ionization flame control. Gas Type: Configurable for Natural Gas (G20) or LPG (G31). Water Protection: IPX5D electrical protection rating. Control Panel Overview

Marked with a radiator icon; adjusts the temperature of the water flowing to your radiators. The system pressure has dropped too low

The boiler requires a specific water pressure to operate. Check the digital display or the analog gauge. It should sit between 1.0 and 1.5 bar when cold. If it falls below 0.5 bar, locate the filling loop (usually a black plastic handle underneath the boiler) and turn it slowly until the pressure reaches the 1.2 bar mark. 2. Summer vs. Winter Mode

Marked with a tap icon; adjusts the Domestic Hot Water temperature for showers and sinks.