Leica Tc 407 Driver ((new)) May 2026

Open the Windows Device Manager . Under "Ports (COM & LPT)," look for your cable. Note the assigned port number (e.g., COM3). Data Transfer Setup

For Windows 7 through Windows 11, right-click the driver installer and select "Run as Administrator" to ensure proper registry updates.

Once the driver is installed, you must align the communication settings on both the instrument and the PC: LEICA TC 407 driver

Most users connect via a GEV189 , GEV195 , or GEV218 cable. You can find official downloads for these drivers on the Leica Geosystems Support Portal or through regional distributors like Geo-Spektr .

Connect the serial end to the port underneath the TC 407 screen and the USB end to your computer. Open the Windows Device Manager

Программное обеспечение к тахеометрам Leica - Гео-Спектр

Connecting your Leica TC 407 total station to a modern computer requires specific to bridge the gap between the instrument's serial communication and contemporary USB ports. Because this hardware relies on older RS232 protocols, the "driver" usually refers to the USB-to-Serial cable driver (such as for the GEV189 or GEV267 cables) and the data management software that recognizes the device. Essential Software and Drivers Data Transfer Setup For Windows 7 through Windows

This is the primary software for managing data from the TPS400 series. While older versions like Survey Office were designed for Windows XP, newer versions of Leica Geo Office Tools are compatible with Windows 10 and 11.

If you are using a generic USB-to-serial adapter, you may need Prolific or FTDI drivers, which are often available through DriverScape . How to Install the LEICA TC 407 Driver

To successfully transfer survey data, you must install both the hardware communication drivers and the interface software: