Nt18b07 Manual — [2021]

Press the release button to let the pusher slide forward against the nails. Operating Instructions Follow these steps to achieve clean, professional results: Powering On

Controls how deep the nail is driven. Magazine: Holds the strips of 18-gauge brad nails. Pusher Lever: Pulls back to allow nail loading.

If nails are sitting too high or sinking too deep, use the depth adjustment dial located near the nose. To sink nails deeper into the wood. nt18b07 manual

To leave the nail head flush or slightly raised. Selecting Firing Modes

Best for precision. You must depress the contact trip, then pull the trigger for each nail. Press the release button to let the pusher

Avoid using lubricants or oils unless specifically directed, as this tool uses a sealed compressed air system.

Understanding the layout of your nailer ensures efficient use: The point where nails exit. Pusher Lever: Pulls back to allow nail loading

💡 Keep the magazine clean of sawdust to prevent feeding issues.

Check the battery charge level. If the battery is full but power is low, the internal air pressure seal may require professional servicing. Storage and Care Store the tool in a dry, room-temperature environment. Wipe the exterior with a clean, damp cloth after use.

Pull back the pusher lever until it locks at the rear of the magazine.