Stenhoj Ds2 Manual !!link!! May 2026

Electromechanical (dual motors or single motor with chain). Lifting Height: Approximately 1,900 mm to 2,000 mm. Lifting Time: Around 45 to 50 seconds.

The lifting screws require immediate lubrication. Worn Bearings: Top or bottom bearings may need replacement. stenhoj ds2 manual

Drill holes into the concrete through the base plate holes.Use high-quality expansion anchors or chemical resin anchors.Torque all bolts to the manufacturer’s specified settings. Step 4: Connecting the Top Crossbeam Electromechanical (dual motors or single motor with chain)

To help you get the exact information for your specific workshop setup, could you tell me: The or year of manufacture for your DS2?

Ensure no tools or people are under the lift. Press Lower: Hold the down button on the control panel.

Screw the rubber pads up to touch the chassis. Initial Lift: Raise the vehicle slightly off the ground.

Electromechanical (dual motors or single motor with chain). Lifting Height: Approximately 1,900 mm to 2,000 mm. Lifting Time: Around 45 to 50 seconds.

The lifting screws require immediate lubrication. Worn Bearings: Top or bottom bearings may need replacement.

Drive the vehicle centrally between the posts.

To help you get the exact information for your specific workshop setup, could you tell me: The or year of manufacture for your DS2?

Ensure no tools or people are under the lift. Press Lower: Hold the down button on the control panel.

Screw the rubber pads up to touch the chassis. Initial Lift: Raise the vehicle slightly off the ground.