Reading and clearing standard diagnostic trouble codes (DTCs) across various modules.
To use version 1.19g successfully, you need specific hardware and driver configurations:
Reading the Secret Key Code (SKC) or login code from the immobilizer to adapt new keys. vag eeprom programmer 119g skacat upd
You must install a Virtual COM Port (VCP) driver (such as those from FTDI Chip ) to map your USB cable to a virtual serial port.
A standard KKL (K-Line) USB cable (often the "blue" VAG-COM 409.1 cable) is required. Modern VCDS HEX-CAN cables are generally incompatible for EEPROM writing with this specific tool. A standard KKL (K-Line) USB cable (often the
VAG EEPROM Programmer 1.19g: A Complete Guide to Downloading and Using the Tool
Reading and clearing "crash data" or error codes from SRS modules after an accident. Adjusting or setting the odometer value, often required
Adjusting or setting the odometer value, often required after replacing an instrument cluster.
The software typically only functions when the cable is assigned to COM1 or COM2 in the Windows Device Manager.