Wmn6rexe Install Fix Access

Do not throw this away! It is essential for leveling.

Pro Tip: For the WMN6REXE, you usually don't need the bottom holes; the TV hangs from the top and rests against the wall at the bottom using included spacers. Step 3: Mapping the Wall

Ensure the top hooks are fully seated. If the wall isn't perfectly flat, you may need to use the small plastic spacers included in the box to even out the bottom. Final Thoughts wmn6rexe install

The WMN6REXE provides one of the cleanest aesthetics in home cinema. While the installation requires a bit more "measure twice, drill once" discipline than a standard articulating mount, the gapless result is well worth the effort.

A power drill, 5/16" (8mm) masonry bit (for brick) or wood bit (for studs), a level, a pencil, and a Phillips-head screwdriver. Step 1: Unboxing and Part Identification Open your kit and ensure you have: The Wall Plates: Two small, square brackets. Do not throw this away

Various screws and anchors for different wall types. Step 2: Preparing the TV

Lower the TV slowly until it clicks or seats firmly into the hooks. Step 3: Mapping the Wall Ensure the top

Check if your cables (HDMI, Power) are bundled too thick. The Slim Fit mount requires cables to be recessed or very thin.

Place your level across both wall plates. If they aren't perfectly aligned, the "Slim Fit" design offers very little room for adjustment later. Step 5: The "Big Hang" This part requires two people.